*德國(guó)耶拿撞擊球*德國(guó)耶拿撞擊球

*407-111.860德國(guó)耶拿撞擊球 

402-889.061Extended Sulfur Calibration Kit; 0,05 - 10 mg/l

402-889.060Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l  

402-889.070Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank

402-889.167Sulfur Calibration Kit (10 - 100 mg/l) incl. blank

402-889.164Sulfur Calibration Kit (100 - 500 mg/l)

402-889.069Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank

402-889.165Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank

402-889.162Nitrogen Calibration Kit (100 - 500 mg/l)

402-823.048Membrane dryer

402-815.030O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces

multi EA 5000: sealing for inner part of membrane dryer

Sulfur Coulometer

402-889.313Absorber tube for  Sulfur coulometer, glass

402-820.110Connecting hose 1/8", (sold by meter), 1m

402-889.302Diaphragma for titration cell of Sulfur coulometer

402-889.308Sealing for screw cap with hole, GL 32, Sulfur coulometer

402-889.309Sealing for screw cap with hole, GL 14, Sulfur coulometer

402-889.307Sealing for screw cap with hole, GL 18, Sulfur coulometer

402-889.311Gas introduction tube for titration cell of Sulfur coulometer, glass

402-520.137Glass screw joint (gray)

multi EA 5000: (Screw joint for tube 8 mm)

402-889.301Indicator electrode for titration cell of Sulfur coulometer

402-889.303Cathode  for titration cell of Sulfur coulometer

402-889.310Stirrer bar, titration cell, Sulfur coulometer

402-884.015Packet with one charge of silver wool

402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes,  Sulfur coulometer

402-889.306Screw cap with hole, GL 18

402-889.304Screw cap with hole, GL 32 Diaphragma,  Sulfur coulometer

402-889.314Septa for titration cell for Sulfur Coulometer, set a 50 pieces

402-889.300Titration cell for Sulfur coulometer, glass

402-889.312Fitting GL zz, for absorber tube, sulfur coulometer

402-886.311Syringe graduated 500 μl with removable needle for manual injection

402-885.019Halogen absorber, complete with U-tube

402-810.050Halogen absorber filling (copper- and brass wool)

402-885.017High-temperature mat, set of 3 pieces

402-823.056Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operatio

402-889.657Condensation coil

402-810.059Special catalyst platinum, sufficient for 5 refills

402-810.048Special catalyst platinum, one refill

402-886.318Sample vials, 8 ml

50 mm x 18 mm, 125 pieces

402-884.005Pump hose for peristaltic pump, waste

402-881.006Quartz glass cullet, coarse grains, packet of 80 g

402-825.044Quartz wool, 1 packet

402-889.659Septum TIC vesselno picture available

402-889.658Septum combustion tube

402-881.245Set of TC prefilter and water trap

402-889.594Syringe 250 μl with vent and removable needle

402-889.593Syringe 500 μl with vent and removable needle

(for autosampler)

402-889.656TIC vessel

A402-825.150U-tube, o.d. = 11 mm, without filling for halogenabsorber

(without connections)

402-889.655Combustion tube

402-815.831Hose to connect suction extractor at workplace or vent

lengh 70 cm

402-889.549Connecting part (metal) for  gas transfer line

with outside thread

402-825.123Beaker for sulfuric acid vessel

402-889.561Replacement hose for heated gas transfer line

402-820.053Ferrule for connecting part (metal)

for gas transfer line with outside thread

402-820.055Ferrule for screw joint

gas transfer line with inside thread

402-889.559Gas transfer hose

402-889.071    Calibration Kit ( 0.1 - 10 mg/l) incl. blank B402-889.166    Calibration Kit (10 - 100 mg/l) incl. blank

402-889.163    Calibration Kit (100 - 500 mg/l)

402-520.177ferrule set,  1/4" TFE

402-30003Ferrule set,  1/8" PTFE

402-825.124Petri dish for sulfuric acid vessel

402-889.569Tubing inside sulfuric acid vessel with ferrule

402-889.508sulfuric acid vessel with outlet

402-889.507Safety cowl for the sulfuric acid tank

402-825.108Funnel for sulfuric acid vessel

402-889.573Connector sulfuric acid vessel

402-30031Swagelok screw fitting, 1/4" onto 1/8", PTFE

detection with     module high sensitive

402-890.007Storage vessel for sensor electrode

A402-889.085Mounting to connect suction extractor at workplace, NS

14.5 brown glass

402-99998preamplifier for sensor electrode

402-889.123Gas introduction tube

402-889.124Set of rubber plugs; 1 x NS14, 1 x NS7

402-889.112Internal electrolyte sensor electrode, 50 ml

402-815.023Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece

402-889.006Platinum electrode

402-889.184Electrolyte bridge

402-889.110Salt solution to make up 100 ml electrolyte

402-889.002Sensor electrode   402-889.536Silver electrode

detection with titration cells sensitive and high concentration

402-889.538Storage vessel for combination electrode

402-880.605Disposable tube 18 mm x 6 mm, filled

packet of 10 pieces, for AOX determination (column method)

402-890.610Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method)

402-880.211Combination electrode (ceramic)

402-815.022Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece

402-889.673Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces